Tarnished Gold
when you look at the tarnished gold ring, earring, necklace, or else you’re disappointed. mustahtavaa and the reddish tummua give it a dirty appearance. we want our gold jewelry, because of its attractive gloss. however, because it is stained, all the gloss has disappeared and it seems to be a very dull and dark. not so, that the gold jewellery that regularly come to suffer puet. also which are stored in the jewelry box can contaminate places. we can see how it is to take place in the shoulder.
what causes suffer gold
in principle, the gold is inert nature and reacts easily with other elements. therefore, there is no possibility of pure gold to be affected. in the absence of a clean format of gold (24kt gold) is a very soft, other metals such as silver and copper in the mix, the more difficult. these elements, which react to the oxygen in air, humidity, etc. and the ratio of the gold. there are other substances, such as the sweat, the natural oils of the skin, skin care products, perfumes and meikkej?, when the contact of gold so that it appears to be more dirty and haalistuneita on. you have noticed that the jewellery, which contain a higher proportion of gold or 18 carats shall not be affected, but those who have lower carats, are saying about 9-14 carats are more exposed to the ratio. this is due to the simple reason that, in the later case, the percentage share of gold is low and the other elements are high.
how to clean the affected gold
gold is a precious metal. you can not afford to use any false stores jewelry cleaning technique and damage it. for this reason. here we discuss two powerful technology that can return an attractive natural gloss and yellow metal.
method # 1
you may also find a wide variety of products on the market that claim to clean the face of gold. instead of using them, you can clean the tarnished gold and warm water using a mild dish pesuaineella. built-in soap solution by mixing one of the quirt and pesuaineella together in a bowl of warm water.a piece of jewelry to retract this solution for about 5 minutes. then rub the surface gently with the jewelry. if the dirt is stubborn, you can use a soft brush hangata it thoroughly. when all the dirt and garbage is removed, rinse it off with warm water. erase the surplus water with a soft cloth. then let it dry out in the next 24 hours and then put it in the jewellery box. here i would like to mention that, do not use any abrasive cleaning agents or strong or rigid brush face of gold. because gold is a soft, these materials can cause ugly scratches jewelry piece.
method # 2
alternatively, you can use a bit more by using ultrasonic cleaning machines. you can buy one such machine that has a size of less than those who see the jewelry stores for cleaning tarnished gold jewelry at home. these machines from the ultrasonic sound waves to remove dirt and debris. you must first bring down some of the cleaning fluid to the computer. use a mixture of liquid dishwasher soap and 95% of the ammonia solution for this purpose. set the jewelry to the computer and insert it in the ultrasonic sound waves s?teili. computer explode in the presence of the jewelry piece of dirt and make it clean and shiny without scratched.
if none of the pilaamaan remover at home to successfully recover the original sheen of your gold jewelry you need some professional help. jewellery has more experience than you and i, and they can rightly proposes how to clean gold jewelry, which is badly affected. if there is some bad scratches on the cd-rom, it may require special processing abrasive papers available in jewelry.
you can prevent further tarnishing by proper treatment of gold jewelry. gold jewelry is jewelry box, to be protected from exposure to dust. keep each in a separate case, the key necklaces so that they do not correspond to the goggles. may be caused by exposure to hot water stained gold for a long time. therefore, it is not recommended that you use them, taking a hot shower.